Welcome to Sharetop Technology Co.,ltd.
Hotline：+86-0755-27524036
- Products description -
The SFP+-10G-DWDM-40km-LC-DDM transceivers include an PIN photo detector diode and temperature stabilized DFB-EML transmitter. Digital diagnostic functions are available via an I2C.This module is designed for single mode fiber and operates at a nominal wavelength of 100GHz ITU Grid, C Band DWDM wavelength.
- Product Features -
Up to 11.1Gbps Data Links
Up to 80km transmission on SMF
DWDM EML Laser and APD receiver
Metal enclosure, for lower EMI
2-wire interface with integrated Digital Diagnostic monitoring
Hot-pluggable SFP+ footprint
Specifications compliant with SFF 8472
Compliant with SFP+ MSA with LC connector
Single 3.3V power supply
Case operating temperature range:0°C to 70°C
Power dissipation < 1.5W
- Product Specification -
10GBASE-ZR/ZW
80 km 10G Fiber Channel
10G Ethernet with FEC
Optical Characteristics
Parameter | Symbol | Min | Typ | Max | Unit | NOTE |
Transmitter | ||||||
Average Optical Power | Pout | -1 | 3 | dBm | 1 | |
Optical Wavelength | λc | λc -0.1 | λc +0.1 | nm | ||
Center Wavelength Spacing | 100 | GHz | 2 | |||
Optical Extinction Ratio | ER | 6 | dB | |||
Transmitter and Dispersion Penalty | TDP | 3.0 | dB | |||
Side mode Suppression ratio | SMSR | 30 | dB | |||
Average Launch Power(Laser Off) | Poff | -30 | dBm | |||
Output Eye Mask | Compliant with IEEE 802.3ae | |||||
Receiver | ||||||
Rx Sensitivity | RSENS | -15.8 | dBm | 3 | ||
Input Saturation Power (Overload) | Psat | 0.5 | dBm | |||
Wavelength Range | λC | 1270 | 1610 | nm | ||
LOS De -Assert | LOSD | -19 | dBm | |||
LOS Assert | LOSA | -28 | dBm | |||
LOS Hysteresis | 0.5 | dB | ||||
Notes:
1. Output power is power coupled into a 9/125 mm single-mode fiber.
2. Corresponds to approximately 0.8 nm.
3. Measured with a PRBS 231-1 test pattern, @10.325Gb/s, BER<10-12 .
Ordering information
Type | Rate | Wavelength | Transmission Distance | Transmitter Power | Receiver sensitivity | Interface | Operating temperature |
CWDM SFP+ | 10G | 1270-1450nm | 10KM | -1~-5 | ≤-14.4 | LC | 0-70℃ |
10G | 1470-1610nm | 40KM | -1~-3 | ≤-15.8 | LC | 0-70℃ | |
10G | 1470-1610nm | 80KM | 0~-4 | ≤-23 | LC | 0-70℃ | |
10G | C20-C60 | 40KM | -1-3 | ≤-15.8 | LC | 0-70℃ | |
10G | C20-C60 | 80KM | 0-4 | ≤-23 | LC | 0-70℃ |
|
Products damaged due to human or non-use of other causes of improper,we promises one year warranty and lifetime maintenance,but the unauthorized disassembly equipment caused damage is not covered under warranty and returned within range. |
|
Under normal use,if there are product quality problems,or not work normally,we provide free repair or replacement service within one year;Within three years more than one year,we provide to collect the material cost,maintenance free. Repair warranty period of three years from the freight borne by each of the parties.After three years of warranty,the material cost,maintenance,freight(refers to the product of the two-way shipping to and from)shall be borne by the user. |
|
We promise that the product we provide can meet the performance requirements of users , and it is supplied by the user's sample request. |
