Welcome to Sharetop Technology Co.,ltd.
Hotline：+86-0755-27524036
- Products description -
Fiber optical bypass protection system(OBP)provides Node protection for LSPs,it can bypass the failed link as well as node through next-next-hop(NNH)backup tunnels.It adds bypass relay functionality to any network node,can automatically switch by detecting the nodes optical power supply or signal failure.Therefore to ensure that traffic from an LSP traversing a neighboring router can continue to reach its destination even if the neighboring router fails.
- Product Features -
1.1:1,1+1 and 1-1 protection for optional
2.Less than 15ms automatic switch time
3.SNMP Remote network management
4.Real-time monitoring nodes from nodes failure
5.Dual hot redundancy power supply and hot-pluggable
6.Supports Fast,Gigabit and 10 Gigabit Ethernet fiber connections in SC/ST/FC/LC connectors
7.Switching threshold power and alarming threshold power can be set up by LCD screen or network management access
8.The main equipment at receiving site have three modes for switching:automatic,forced manual and remote control
- Product Specification -
1.The base station in local network
2.Local transmission network of single station
3.The network computer room
Performance | Parameter |
Wavelength Range | 1310±50nm&1550±50nm |
Dynamic Range of Optical Power | -50～+25dBm |
Return Loss | ≥45dB |
Insertion Loss | <1.5dB(1:1 protected) |
4.5dB(1+1 protected) | |
<1.5dB(1-1 protected) | |
Optical Power Resolution | ≤0.01dB |
Optical Power Measurement Accuracy | ≤0.5dB(-40~+25dBm) |
≤1.0dB(-50~-40dBm) | |
Wavelength Dependent Loss | ≤0.25dB |
Polarization Dependent Loss | ≤0.1dB |
Switching Time | ≤15ms(Typical:5ms) |
LCD Displaying | 160×32 Pixels |
Power Consumption | ≤5W |
Power Supply | A C 220V(Range:100V~276V) |
DC 48V(Range:-35V~70V) | |
Operating Temperature | -10~50°C |
Storage Temperature | -40~+85°C |
Operating Humidity | 5%~95%no condensation |
Dimensions(unit:mm) | 440(W)*220(D)*44.5(H) |
Management Mode | Console,Telnet,Network management Button&LCD |
Equipment interface | 1x RJ45 Ethernet Port |
1x RS232 Console Port | |
8x Optical Port(LC-UPC by default) | |
Networks Capability | EMS GUI interface |
Remote Upgrading |
|
Products damaged due to human or non-use of other causes of improper,we promises one year warranty and lifetime maintenance,but the unauthorized disassembly equipment caused damage is not covered under warranty and returned within range. |
|
Under normal use,if there are product quality problems,or not work normally,we provide free repair or replacement service within one year;Within three years more than one year,we provide to collect the material cost,maintenance free. Repair warranty period of three years from the freight borne by each of the parties.After three years of warranty,the material cost,maintenance,freight(refers to the product of the two-way shipping to and from)shall be borne by the user. |
|
We promise that the product we provide can meet the performance requirements of users , and it is supplied by the user's sample request. |
