- Products description -
The PON amplifier is developed independently by Sharetop. It complies with the ITU-T G.984.X and IEEE802.3ah standards , it combine the PON technology and photoelectric conversion technology to achieve the extension of the PON signal. The maximum transmission is GPON / 60KM, EPON / 40KM coverage. It is fully compatible with the market-leading OLT / ONU equipment. It is suitable for PON coverage scenarios where need extended distance and the link loss is large,no configuration is required. completely transparent transmission , can rapid provisioning , improve the coverage efficiency of FTTH services.
- Product Features -
Support IEEE802.3ah, ITU-T G.984.X and national standard (YD / T 1475-2006)
Protocol transparent, low latency, good compatibility, fully compatible with the market mainstream OLT / ONU devices
Compatible G / EPON service, the maximum distance EPON / 40KM, GPON / 60KM
The product has 3R function, supports multi-level PON service amplification, PON module supports hot pluggable
Can effectively improve the utilization of the OLT port, which can improve the maximum EPON splitting from 1:32 to 1:64, and the maximum splitting of GPON from 1:64 to 1: 128
Technical Parameters:
item | Technical Parameters | |||
Support protocol | GPON (ITU-T G984.X) 、EPON (IEEE 802.3 ah) | |||
Uplink rate | 1.244G burst signal | |||
Downlink rate | 2.488G continuous signal(GPON)、1.244Gcontinuous signal(EPON) | |||
Compatibility | Compatible with different manufacturers OLT and ONU equipment, Support service transparent transmission | |||
OLT side receive sensitivity | -30~-3 dBm | |||
ONU side receive sensitivity | -28~-8 dBm (burst signal) | |||
OLT side transmitter optical power | +4~+7dBm | |||
ONU side transmitter optical power | 0~+4dBm | |||
working environment | Commercial grade | -10℃~+60℃ | Industrial grade | -40℃~+85℃ |
Working humidity | 5%~95% | |||
Power consumption | < 15W | |||
MTBF | 128053 hour |
Products damaged due to human or non-use of other causes of improper,we promises one year warranty and lifetime maintenance,but the unauthorized disassembly equipment caused damage is not covered under warranty and returned within range. | |
Under normal use,if there are product quality problems,or not work normally,we provide free repair or replacement service within one year;Within three years more than one year,we provide to collect the material cost,maintenance free. Repair warranty period of three years from the freight borne by each of the parties.After three years of warranty,the material cost,maintenance,freight(refers to the product of the two-way shipping to and from)shall be borne by the user. |
|
We promise that the product we provide can meet the performance requirements of users , and it is supplied by the user's sample request. |