纤亿通-专注光纤通讯产品研发，欢迎您的光临
咨询热线：0755-27524036
- Products description -
Sharetop’s 100G CFP4 LR4 optical receiver , 4 lanes of optical data streams are optically demultiplexed by an integrated optical demultiplexer. Each data steam is recovered by a PIN photodetector and transimpedance amplifier, retimed, and passed on to an output driver. This module features a hot-pluggable electrical interface, low power consumption, and MDIO management interface.
- Product Features -
Supports up to 112Gbps bit rates
LC connector
Hot pluggable
Operating electrical serial data rate up to 27.952493Gbps
4 parallel electrical serial interface
Applicable for 10km SMF connection
Low power consumption (Max: 3W)
Digital Diagnostic Monitor Interfacel
MDIO Communication Interface
Compliant with 100GBASE-LR4 and OTU4
Operating case temperature:Commerical:0 to 70 °C
- Product Specification -
Local Area Network(LAN)
Wide Area Network(WAN)
Switch to router interface
ITU-T OTU4 OTL4.4
Standards
Compliant with IEEE 802.3ba
Compliant with CFP4 MSA hardware specifications
Compliant with CFP4 MSA management specifications
Compliant with ITU-T G709/Y.1331
Compliant with RoHS
Optical Characteristics
(Tested under recommended operating conditions,unless otherwise noted)
Parameter | Symbol | Unit | Min | Typ | Max | Notes | |||
Optical Receiver Characteristics | |||||||||
Receive Rate for Each Lane | Gbps | 25.78125 | 27.9525 | ||||||
Overload Input Optical Power | Pmax | dBm | 5.5 | 3 | |||||
Average Receive Power for Each Lane | Pin | dBm | -8.6 | 3 | 4 | ||||
Receive Power In OMA for Each Lane | PinOMA | dBm | 3 | ||||||
Difference in Receive Power in OMA between Any Two Lanes | dBm | ||||||||
Receiver Sensitivity in OMA for Each Lane | SOMA | dBm | -8.6 | 5 | |||||
Stressed Receiver Sensitivity in OMA for Each Lane | dBm | -6.8 | 6,7 | ||||||
Notes:
1. The supply current includes CFP4 module’s supply current and test board workingcurrent.
2. Average launch power, each lane (min) is informative for 100GBase-LR4, not the principal indicator of signal strength.
3.The receiver shall be able to tolerate , without damage, continuous exposure to an optical input signal having this average power level
4. Average receive power, each lane (min) is informative and not the principal indicator
of signal strength. A received power below this value cannot be compliant; however, a value above this does not ensure compliance
5. Receiver sensitivity (OMA), each lane (max) is informative
6. Measured with conformance test signal at TP3 for BER=10-12
7. conditions of stressed receiver sensitivity test: vertical eye closure penalty for each lane is 1.8dB;stressed eye J2 jitter for each lane is 0.3UI; stressed eye J9 jitter for each lane is 0.47UI.
Ordering Information
Part Number | Description |
XYT--100G_CFP4 LR4_Receiver | 100G CFP4 LR4 Receiver 10Km 0~70℃ |
隐私保护 |
法律声明 |
在线留言 |
网站导航 |
网站地图 |
文档下载 | 咨询热线：0755-27524036 |
订阅
深圳纤亿通科技有限公司版权所有 转载必究 Copyright 2010-2019 poptimes CO.,Ltd. All rights reserved.
备案号:粤ICP备14020946号
友情链接： 光创未来| fiber168| 纤亿通光源放大器网站| 纤亿通光模块网站| 纤亿通保偏无源器件网站| 纤亿通OTN网站
