首页 > 产品 >Optic Transceiver Module>XFP 10G>10G XFP Dual Fiber Module

联系我们

联系我们

0755-23334940 0755-27524036

企业邮箱

sales001@xyt-tech.com

公司地址

深圳南山区西丽文苑路35号聚创金谷创意园A栋606

: 10G XFP BIDI 60KM Optic Module

产品分类：10G XFP Dual Fiber Module
产品编号：10Gb/s 60km BIDI XFP Optical Transceiver

立即咨询

产品概述
产品特性
产品应用
产品参数

- Products description -

Small Form Factor 10Gb/s(XFP)transceivers are compliant with the current XFP Multi-Source Agreement(MSA)Specification.They comply with 10-Gigabit Ethernet 10GBASE-LR/LW per IEEE 802.3ae and 10G Fiber Channel.Digital diagnostics functions are availablevia a 2-wire serial interface,as specified in the XFP MSA.The transceiver is RoHS compliant and leads free per Directive 2002/95/EC3

- Product Features -

1.Hot-pluggable XFP footprint
2.Supports 9.95Gb/s to 11.3Gb/s
3.CWDM DFB Laser and PIN receiver
4.RoHS-6 Compliant(lead-free)
5.Power dissipation<2.0W
6.Temperature range:0°C to 70°C
7.Single power supply:3.3V
8.Maximum link length of 10km
9.Full Duplex LC connector
10.No Reference Clock required
11.Built-in digital diagnostic functions
12.Standard bail release mechanism

- Product Specification -

10GBASE-LR/LW 10G Ethernet
10G Fiber Channel
SONET OC-192 SR-1&SDH STM I-64.1

- 产品参数 -

Table 1-Optical and Electrical Characteristics

Parameter		Symbol		Min	Typical	Max	Unit	Notes
Transmitter
Centre Wavelength			λc	1260	1310	1360	nm
Spectral Width(RMS)			?λ			4	nm
Average Output Power			Pout	-9		-3	dBm	1
Extinction Ratio			ER	9			dB
Optical Rise/Fall Time(20%~80%)			tr/tf			0.26	ns
Data Input Swing Differential			VIN	400		1800	mV	2
Input Differential Impedance			ZIN	90	100	110	Ω
TX Disable	Disable			2		Vcc	V
TX Disable	Enable			0		0.8	V
TX Fault	Fault			2		Vcc	V
TX Fault	Normal			0		0.8	V
Receiver
Centre Wavelength			λc	1260		1580	nm
Receiver Sensitivity						-23	dBm	3
Receiver Overload				-3			dBm	3
LOS De-Assert			LOSD			-24	dBm
LOS Assert			LOSA	-35			dBm
LOS Hysteresis				1		4	dB
Data Output Swing Differential			Vout	400		1800	mV	4
LOS			High	2		Vcc	V
LOS			Low			0.8	V

NOTE:

1.The optical power is launched into SMF.

2.PECL input,internally AC-coupled and terminated.

3.Measured with a PRBS 27-1 test pattern@1250Mbps,BER ≤1×10-12.

4.Internally AC-coupled.

Parameter

Type	Rate	Wavelength	Transmition distance	Transmitter power	Receiver sensitivity	Interface	Operating temperature
SFP	10G	1270/1330nm	10M	-1~-5	≤-14.4	LC	0-70℃
	10G	1270/1330nm	40KM	0~5	≤-15.8	LC	0-70℃
	10G	1270/1330nm	60KM	0~5	≤-20	LC	0-70℃

联系我们

10G XFP BIDI 60KM Optic Module

相关产品