首页 > 产品 >Optic Transceiver Module>XFP 10G>10G XFP Single Fiber Module

联系我们

联系我们

0755-23334940 0755-27524036

企业邮箱

sales001@xyt-tech.com

公司地址

深圳南山区西丽文苑路35号聚创金谷创意园A栋606

: 10Gb XFP+ 10KM Optic Module

产品分类：10G XFP Single Fiber Module
产品编号：XYT-10G-XFP

立即咨询

产品概述
产品特性
产品应用
产品参数

- Products description -

10Gb/s 850nm Multimode XFP Optical Transceiver multi-rate 10G XFP transceiver is designed for serial optical data communications such as 10G Fiber Channel.It supports the 10Gbps transmission on both 50/125 mm and 62.5/125 mm MMF.The transceiver consists of two sections:The transmitter section consists of adirectly modulated 1310nm VCSEL,driver and signal conditioner.The receiver section incorporates a PIN photodiode integrated with a trans-impedance preamplifier(TIA)and signal conditioner.Digital diagnostics functions are available via a 2-wire serial interface,as specified in the XFP MSA.

- Product Features -

1.Up to 10Gb/s Data Link
2.Complaint to XFP MSA
3.Compliant with FC-Pi-4 800-M5/M6/M5E-LC-I
4.Maximum link length of 10km MMF
5.2-Wire Interface for Integrated Digital Diagnostic Monitoring
6.XFI and Line side Loopback Mode
7.No reference clock required
8.Low Power Dissipation<1.5W
9.RoHS Compliant
10.Case Temperature range ：-5°C to 70°C
11.Duplex LC Connector

- Product Specification -

1．10GBASE-ZR/ZW 10G Ethernet
2．10KM 10G Fiber Channel
3．SONET OC-192&SDH STM 64

- 产品参数 -

Table 1-Optical and Electrical Characteristics

Parameter		Symbol		Min	Typical	Max	Unit	Notes
Transmitter
Centre Wavelength			λc	1260	1310	1360	nm
Spectral Width(RMS)			?λ			4	nm
Average Output Power			Pout	-9		-3	dBm	1
Extinction Ratio			ER	9			dB
Optical Rise/Fall Time(20%~80%)			tr/tf			0.26	ns
Data Input Swing Differential			VIN	400		1800	mV	2
Input Differential Impedance			ZIN	90	100	110	Ω
TX Disable	Disable			2		Vcc	V
TX Disable	Enable			0		0.8	V
TX Fault	Fault			2		Vcc	V
TX Fault	Normal			0		0.8	V
Receiver
Centre Wavelength			λc	1260		1580	nm
Receiver Sensitivity						-23	dBm	3
Receiver Overload				-3			dBm	3
LOS De-Assert			LOSD			-24	dBm
LOS Assert			LOSA	-35			dBm
LOS Hysteresis				1		4	dB
Data Output Swing Differential			Vout	400		1800	mV	4
LOS			High	2		Vcc	V
LOS			Low			0.8	V

NOTE:

1.The optical power is launched into SMF.

2.PECL input,internally AC-coupled and terminated.

3.Measured with a PRBS 27-1 test pattern@1250Mbps,BER ≤1×10-12.

4.Internally AC-coupled.

Parameter

Product Type	Rate	Wavelength	Transmission distance	Transmitter power	Receiver sensitivity	Interface	Operating temperature
10G XFP	10G	850nm	300M	-1~-5	≤-12	LC	0-70℃
	10G	1310nm	2KM	-1~-6	≤-14.4	LC	0-70℃
	10G	1310nm	10KM	-1~-6	≤-14.4	LC	0-70℃
	10G	1550nm	40KM	-1~-3	≤-15.8	LC	0-70℃
	10G	1550nm	80KM	0~-4	≤-23	LC	0-70℃

联系我们

10Gb XFP+ 10KM Optic Module

相关产品