- Products description -
QSFP PSM IR4 are a high performance,low power consumption,long reach interconnect solution supporting 40G Ethernet,fiber channel and PCIe.It is compliant with the QSFP MSA and 40GbE PSM4.QSFP PSM IR4 is an assembly of 4 full-duplex lanes,where each lane is capable of transmitting data at rates up to 10Gb/s,providing an aggregated rate of 40Gb/s.
- Product Features -
1.Full duplex 4 channel 1310nm parallel module
2.Transmission data rate up to 11.3Gbit/s per channel
3.SFF-8436 QSFP+compliant
4.Hot pluggable electrical interface
5.Differential AC-coupled high speed data interface
6.4 channels 1310nm FP array
7.4 channels PIN photo detector array
8.Maximum link length of 2km on G652 single mode fiber(SMF)
9.Maximum power consumption 3.5W
10.Housing isolated from connector ground
11.Operating case temperature 0°C to+70°C
12.3.3V power supply voltage
13.RoHS 6 compliant
- Product Specification -
1.Infiniband Connectivity SDR/DDR/QDR.
2.10/40 Gigabit Ethernet.
3.2/4/8 Gbps Fiber Channel.
4.Data Centers and Storage Arrays.
Table 1-Optical and Electrical Characteristics
Parameter | Symbol | Min | Typical | Max | Unit |
Storage Ambient Temperature | -40 | +85 | °C | ||
Operating Case Temperature | Tc | 0 | +70 | °C | |
Power Supply Voltage | VCC3 | 3.14 | 3.3 | 3.47 | V |
Power Dissipation | PD | 1.5 | W |
Systems
Performance | 10.3125 Gpbs(per channel)line speed,full duplex Bit error rate:better than 10E-12 |
Media | Hot-pluggable,industry-standard Small Form-Factor Pluggable(QSFP+)copper cable,available up to 10m |
Operating parameters | Supply voltage:3.3V Power consumption(per end):max 1.5W |
Ordering information
Part Number | Product Description |
XTY-C192-XXC | SFP+Direct Attach(10GSFP+Cu),1m,3m,5m,7m 10m 0?C ~+70?C |
隐私保护 |
法律声明 |
在线留言 |
网站导航 |
网站地图 |
文档下载 | 咨询热线:0755-27524036 |
订阅
深圳纤亿通科技有限公司版权所有 转载必究 Copyright 2010-2019 poptimes CO.,Ltd. All rights reserved.
备案号:粤ICP备14020946号
友情链接: 光创未来| fiber168| 纤亿通光源放大器网站| 纤亿通光模块网站| 纤亿通保偏无源器件网站| 纤亿通OTN网站